| Model | V-6 |
| Stereo Mode (both channel driven) | Continuous Average Output Per Channel |
| FTC @ THD+N=0.1%, f=20Hz~20kHz | Ch1 | Ch2 |
| 8 ohm/Stereo | 200W | 200W |
| 4 ohm/Stereo | 270W | 270W |
| 2 ohm/Stereo | | | | |
| EIA @ THD+1=1%, f=1kHz | |
| 8 ohm/Stereo | 210W | 210W |
| 4 ohm/Stereo | 300W | 300W |
| 2 ohm/Stereo | | | | |
| Bridge Mono Mode | 550W |
| FTC @ THD+N=0.1%,f=1kHz | |
| 8 ohm/Bridge | |
| EIA @ THD+N=0.1%,f=1kHz | 600W |
Power Bandwidth
(Ref. 1kHz, THD+N=0.1%,+0/-1dB) | 20Hz~25kHz |
THD+N
(Ref. 1kHz,f=20Hz~20kHz) | ≤0.05% |
Frequency Response
(Ref. 1kHz, 1watt output, +0/-1.5dB) | 20Hz~35kHz |
IMD(SMPTE4:1)
(60Hz:7kHz, 4:1 Half power) | |
| 4-8 ohm/Stereo | ≤0.1% |
| 2 ohm/Bridge | |
Crosstalk
(RL=8Ω, Half power, Att.Max 600Ω shunt) | ≥90dB, 1 kHz |
Residual Noise
(20Hz~22kHz LPF,Att.min) | ≥76dB |
S/N Ratio
(Filter:A-Weighting, RMS) | ≥105dB |
Damping Factor
(RL=8Ω, f=1kHz) | ≥300 |
| Input Sensitivity (Att. max) | |
| 4 ohm/Stereo | +4.0 dBu |
| 8 ohm/Bridge | +5.1 dBu |
| Voltage Gain(Att. max) | 28.5dB |
| Output Circuitry | AB |
| Input Impedance | 10kΩ(Unbalance), 20kΩ(Balance) |
| Controls | AC Switch,Ch1 and Ch2 gain Control knobs
Stereo/Mono Bridge Switch |
| Connectors | XLR jack, 1/4" TRS jack
Touch-Proof binding posts, Speakon jack |
| Indicators | Power(Green),Protect(Red),Clip(Red),
Mon Bridge(Green) |
| Protection Circuits | | 1)Short Circuits
2)Current Limit
3)DC detection
4)Thermal
5)Turn On/Off muting
6)AC Line fuse | |
| Fan Circuit | Single Fans Variable low Speed(50℃),
High speed(55℃) |
| Power Consumption | 980VA |
| DIMENSION | 480mm X 88mm X 407mm |
| Weight | 14.36 kg / 31.65 Ibs |