• Stereo/parallel/bridge-mono mode • Effi cient forced-air cooling prevents excessive thermal buildup • Electronically balanced XLR inputs; binding post and Speakon? outputs • Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel • Protection against shorts, no-load, on/off thumps and radio-frequency interference Minimum Guaranteed Power
per channel, both channels driven | | LPS800
| LPS1500
| LPS2500
| 1 kHz with 0.5% THD
Stereo, 2 ohms (per ch.) Stereo, 4 ohms (per ch.) Stereo, 8 ohms (per ch.) Bridge-Mono, 8 ohms Bridge-Mono, 4 ohms | -- 300W 150W 600W -- | -- 450W 250W 800W -- | -- 725W 550W 1,450W -- |
Sensitivity (for full rated power at 4 ohms) | 1.25 V rms | Frequency Response (at 1 watt) | 40Hz – 20kHz, +0dB/-3 dB | Signal-to-Noise Ratio (below rated power, 20Hz – 20kHz, A-weighted) | >100 dB | Total Harmonic Distortion (THD)
| <.5%, 20Hz – 20kHz | Intermodulation Distortion (IMD) (60Hz and 7kHz at 4:1 from full rated output to -30dB) | <.3% | Damping Factor (8 ohms, 10Hz – 400Hz) | >300 | Crosstalk (below rated power) | at 1kHz: -76 dB at 20kHz: -58 dB | Input Impedance (nominal) | 20 kilohms balanced, 10 kilohms unbalanced | Load Impedance (Note: safe with all loads) | 4 and 8 ohms in stereo mode, 8 ohms in bridge-mono | AC Line Voltage and Frequency Configurations Available (±10%) | 120VAC/60Hz 220VAC/50Hz 240VAC/50Hz | Ventilation:
| Flow-through ventilation from front to back | Dimensions: Width, Height, Depth | EIA Standard 19 inches (48.3cm) rack mount wide, 3.5 inches (8.9cm) high, and 15.2 inches (38.6cm) deep | Net Weight, Shipping Weight
| LPS800: 20.9 lb (9.5kg), 24 lb (10.9kg) LPS1500: 22.9 lb (10.4kg), 26 lb (11.8kg) |
|