판매가 | 2540000 |
---|---|
소비자가 | |
적립금 |
|
제휴 적립금 | 네이버 마일리지 적립 |
무이자할부 | |
제조사 | YORKVILLE |
원산지 | 중국 중국 |
유효기간 |
수량 | |
---|---|
국내/해외배송 | |
싸이월드 스크랩 |
|
상품가 | |
세액 | |
공급원가 | |
브랜드 | |
모델 | |
공급사 | |
자체상품코드 | |
상품요약정보 | |
상품간략설명 |
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
PA 고출력 스피커는 왜 스튜디오 모니터스피커만큼 명료하고 섬세한 소리를 재현하지 못할까? 이러한 질문에 답을 가지고 탄생한 엘리트 UnityTM 스피커는 놀라운 해상도와 고감도 주파수 응답특성 그리고 최소의 왜곡율로 사운드를 재현합니다. Yorkville의 특허기술인 UnityTM 혼은 실드된 세개의 미드레인지 우퍼가 혼을 통해 하나의 콤프레션 드라이버로 동작합니다.
이러한 포인트 소스 조합 구조는 고출력 네오디움 우퍼가 프로페셔널 PA 사운드에 허용하는 최고의 사운드에 대한 솔루션을 제공합니다.
Unity™ Series
UCS1 - Subwoofer - 1000w, 15 inch
The UCS1 is the ideal passive subwoofer to use with the Unity™ U15 or U215 loudspeaker systems. This 1000-watt 8-ohm cabinet takes full advantage of its horn-loaded design to deliver fierce bottom end from a surprisingly compact, single 15-inch loaded passive subwoofer.
The performance UCS1 delivers from a box this manageable in size is the direct result of outstanding loudspeaker cabinet design. Optimized horn flare geometry careful attention to the front and rear internal chamber dimensions, as well as the use of a high performance long excursion 15-inch driver gives the UCS1 surprising high output volume and extended bass response for a subwoofer cabinet occupying only a total volume of just over 11 cubic feet.
The UCS1 is made with a solid 15mm 11-ply birch plywood cabinet construction and has a heavy gauge perforated metal grill to protect the components. Integrated wheels and bar handles make moving and stacking the UCS1 as easy as it can possibly be for a subwoofer in this class.
The UCS1 comes in a black carpet covering to mate with the U15 and U215, or is available in a black painted Ultrathane finish (UCS1B) for use with the Ultrathane painted versions of the Unity™ loudspeakers. (U15B and U215B).
제품스팩
System Type | Horn Loaded Subwoofer |
Active or Passive | Passive |
Continuous Power(Watts) | 1000 |
Nominal Impedance (Ohms) | 8 |
Sensitivity (dB @1Watt/1m) | 102 |
Max SPL (dB) | 132 |
Frequency Response (Hz +/- 3db) | 37 - 150 |
LF Driver(s) | 15 inch, Ceramic Magnet, 3 inch voicecoil |
LF Program Power(Watts) | 1000 |
LF Impedance(Ohms) | 8 |
Inputs - 1/4" Jacks | 2 |
Inputs - Speakon 4-pin | 2 |
Other Controls / Features | Speakon™ connectors feature a configuration switch which allows instant reversal of Speakon™ jack pinouts for easy single wire hook-up using optional four wire Speakon™ cables. |
Corners | Black Steel |
Wheels | 2 Rear |
Bar Handles | 2 Top, 2 Side |
Pole Mount Adapter (1 3/8"-3.5cm) | Yes - Top |
Enclosure Materials | 15mm (5/8inch) 11-ply Russian Birch |
Grille | Heavy gauge perforated metal |
Covering / Finish | Black Ozite (Carpet) |
Optional Covering / Finishes | Black Ultrathane Paint (UCS1B) |
Dimensions (DWH xbackW, inches) | 26.25 x 19.25 x 41 |
Dimensions (DWH xbackW, cm) | 67 x 49 x 104 |
Weight (lbs/kg) | 116.4 / 52.8 |
* | Specifications subject to change without notice |
The Unity™ Series of loudspeakers is a radical loudspeaker cabinet design utilizing the patented Unity™ Summation Aperture Horn Technology, which was invented by loudspeaker designer Tom Danley and licensed from Sound Physics Labs Inc.
The Unity™ Series pushes the limits of modern state-of-the-art sound reinforcement technology, which features a radical new loudspeaker horn design, arguably the first major evolution in horn technology in the last 60 years. Ultra clear reproduction through the high-mid band with extremely linear frequency response has been achieved using the patented* Unity™ horn technology, licensed from Sound Physics Labs Inc. Unity™ horn technology combines a single 1" throat with a 1.75” diaphragm high frequency compression driver alongside three 5” ceramic magnet midrange drivers on a single, highly efficient conical horn. This combines high and mid frequency energy in a single 60º x 60º conical horn that produces frequencies from 300Hz to 20kHz. Patent holder Tom Danley explains it this way. "With a conical horn, one sees that at the compression driver exit, the expansion rate is very rapid at high frequency cutoff, and since the expansion rate acts as a high pass filter, the low frequency energy does not couple to the mouth. Move a few inches toward the mouth and one finds the expansion rate is much slower and suitable for low midrange, if only that was where the driver was. All one has to do is obtain a mid driver, suitable for efficient horn loading in that frequency band and find the point in the flare where the expansion rate is suitable for that frequency range and couple the sound in at that point. Because the compression driver and each mid driver are less than 1/4 wavelength apart, their output combines fully and coherently, something which cannot happen if the driver were further than about 1/3 wavelength apart."
*U.S. Patent # 6,411,718 B1
So what exactly does all this mean?
What it means is that all four drivers mounted in a Unity™ horn measure and act like a single point source. The sound produced from the combined 4 drivers act like a single driver. Additional DSP (Digital Signal Processing) is not required to time align the Mid and High frequencies together like in many other conventional systems. This is especially important as it minimizes, if not eliminates, the major phasing and lobing problems typically associated with your standard multiple horn 3-way box. By mechanically time-aligning the mid and High components it makes for a simpler to use system at the same time. DSP processors can assist in such matters as time alignment and minor phase adjustments, but at a greatly enhanced cost, plus they are much more complex to setup and operate. The "Plug-&-Play" simplicity of the Unity™ technology makes such a Professional quality box user friendly for people of all experience levels.
Add to this the fact that the high efficiency of the horn loading leads to the mid and high frequency drivers to be conservatively driven well below each components maximum power handling. In the U15, for example, the cone drivers for the mid section are running well below the rated output capacity in normal operation. They closely match the compression driver in sensitivity and the group of three drivers combined can handle about two times the power. In operation they are padded down about -7dB to match the sensitivity of the low frequency section. As a result of efficient horn loading and high headroom, mid range harmonic distortion is typically much lower than that measured in most speakers at the same SPL, and far lower than any 2” compression driver could attain. Unlike other multi-driver, two or three way full range speaker systems, there is little self-interference between the various components at crossover and unlike conventional loudspeakers systems, the polar plots are free of lobes and large changes in directivity versus frequency.
The Unity™ technology takes advantage of the variable flare rate nature of a conical horn. By sectioning the horn according to the expansion rate, the horn can be divided into frequency bands and be loaded with suitable drivers mounted outside the acoustic path. The front-to-back spacing of the drivers on the horn exactly compensates for a drivers inherent "built-in" delays and the phase shift / delay introduced by the crossover. Polar measurements show that while there are four drivers loading the horn, acoustically they act as ONE source. Energy vs. Time measurements show ONE source. Acoustic phase measurements give no indication of where the crossover is, it in fact, looks and acts like one point source.
We put extensive Research and Development using the latest in Acoustical Measurement and Modeling software to ensure that all Unity™ Series cabinets function equally on their own or in tight pack cluster arrays. To assist in rigging and flying of all cabinets, nine rigging/flying points are standard as follows on all Unity™ Series cabinets: 2 on top, 2 on the bottom, 2 on each side and a single pullback. All 9 flypoints feature threaded inserts for 3/8” ATM™ Eyebolts, the defacto standard for flying hardware due to their strength and durability, not to mention one of the highest load tolerances in the industry. Employing a minimum 5:1 safety ratio and still with a 1550lb/703kg Working Load Limit per eyebolt, and it is safe to say you will never have an issue with safety concerns when rigging any Yorkville cabinet in the air. Should the need arise and you want to fly or install cabinets in an array as large as a 3 wide, tight pack array, we can accommodate that as well. For this application we recommend using the Unity™ Series rigging system, developed by ATM™ Flyware, one of the most trusted names in rigging hardware in the entire entertainment industry. A Rigging, or “Bumper” system is available that was designed exclusively with the Unity™ Series cabinets in mind. This system is the ideal roadworthy way to suspend the Unity™ Series cabinets in the air, at the optimum angle and spacing, to make the most out of the cabinets inherent “footprint” geometry. When connected properly, it will allow a system to be flown up to 3 boxes wide at the perfect splay to maximize dispersion and minimize phasing and lobing. An alternate system is also available when you wish to use Unity™ cabinets in a more permanent fixed installation. Contact ATM™ Flyware for more information on these and many other rigging/flying/installation options.
Rugged Driver Mounting System
All Unity™ cabinets feature a specially reinforced driver mounting system that makes sure the High Frequency horn drivers will still be attached to the horns when you get to the show. The composite horns are pressure fitted to the driver, which is bolted to the internal driver support.
Custom Designed Conical Horns
Custom composite horns are specifically designed for each cabinet and feature the patented Unity™ horn technology.
Neodymium Woofer
The U15 and U215 employ a new technology earth shaking 800 watt 15" Neodymium magnet woofer with 3" voicecoil mounted on an ultra lightweight basket. This combination helps reduce the weight from as much as 30lbs (13.6kgs) or more for many conventional ceramic magnet woofers to a mere 10lbs (4.5kgs) for our Neodymium woofer. In the case of the U215, which features two of the 15” Neodymium woofers, this is a weight reduction of as much as 60lbs versus a similar cabinet loaded with conventional ceramic magnet woofers.
Advanced Crossover Networks and Protection Schemes
All Unity™ cabinets, feature seamless driver interaction through sophisticated high-slope passive networks and ingenious component protection schemes. Rugged jackplates are inset and include a combination of both Speakon™ and 1/4" phone jack inputs.
Advanced PTC™ Horn Protection on the High Frequency
PTC™ is an ingenious current sensing / self-resetting breaker that offers some serious advantages over current protection schemes used in many loudspeaker cabinets. This protection scheme, while always present in the signal path, remains inaudible until it becomes necessary for it to react. It kicks in at a point where it effectively reduces output to the horn and protects that diaphragm from damage due to excessive power input or signal distortion. Unlike a breaker it does not require a physical reset to allow signal back to the horn driver, and unlike a bulb or fuse, does not need to be replaced if the circuit is tripped, and the fuse is blown.
Where PTC™ shines is in heavy feedback environments where most horn diaphragm damage occurs. In rare situations even where a microphone might be dropped in a monitor, the sustained ‘squeal’ can destroy diaphragms in seconds. PTC™ will significantly reduce output level to the horn to protect the diaphragm. When the situation has been rectified, and the feedback eliminated the horn will return to full operating level within half of a second.
Rugged Black Carpet Covering
The stylish yet practical carpet that covers the Unity™ cabinets keeps them looking great. The two part rubberized glue that is used to attach the carpet ensures that Unity™ cabinets will stand up against moisture by effectively wrapping the cabinet in a rubber glove.
Optional Black Ultrathane Paint
Popular in both our élite and Pulse lines, all Unity™ cabinets are available with the optional finish of black Ultrathane paint. The finish was specifically chosen for it's attractive and incredible durability.
Curved Metal Speaker Grilles
Curved metal grilles absorb shocks evenly to resist dings and dents while eliminating frequency resonance. The trapezoidal cabinet shape allows for arrayable performance without phase cancellation.
Recessed Handles
Like all élite cabinets, all Unity™ cabinets feature attractively recessed bar handles. Great care is taken to make sure that they "stay out of the way", but are easy to get at when you need them.
Polemount Adapter
A standard sized, flushmounted Polemount socket receptacle is included in the base of the U15 and U15B. This allows it to be raised on speaker stands to position it over the listeners heads' for greater long distance throw and smoother coverage making it even more versatile in any listening environment.
Warranty
Yorkville covers all Unity™ Series cabinets with our famous “even if you break it” * 2 year unconditional warranty.
상품결제정보
고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등
정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.
무통장 입금은 상품 구매 대금은 PC뱅킹, 인터넷뱅킹, 텔레뱅킹 혹은 가까운 은행에서 직접 입금하시면 됩니다.
주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금을 하셔야 하며 입금되지
않은 주문은 자동취소 됩니다.
배송정보
교환 및 반품정보
교환 및 반품이 가능한 경우
- 상품을 공급 받으신 날로부터 7일이내 단, 가전제품의
경우 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우에는 교환/반품이 불가능합니다.
- 공급받으신 상품 및 용역의 내용이 표시.광고 내용과
다르거나 다르게 이행된 경우에는 공급받은 날로부터 3월이내, 그사실을 알게 된 날로부터 30일이내
교환 및 반품이 불가능한 경우
- 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우. 단, 상품의 내용을 확인하기 위하여
포장 등을 훼손한 경우는 제외
- 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우
(예 : 가전제품, 식품, 음반 등, 단 액정화면이 부착된 노트북, LCD모니터, 디지털 카메라 등의 불량화소에
따른 반품/교환은 제조사 기준에 따릅니다.)
- 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우 단, 화장품등의 경우 시용제품을
제공한 경우에 한 합니다.
- 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우
- 복제가 가능한 상품등의 포장을 훼손한 경우
(자세한 내용은 고객만족센터 1:1 E-MAIL상담을 이용해 주시기 바랍니다.)
※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
(색상 교환, 사이즈 교환 등 포함)
서비스문의